home improvements

Home Renovations

If you’ve already thought of a renovation project for your home, you know it is stressful and that the supply is abundant. One of the most common problems are different tastes for furniture. It is not the same office furniture home furniture. In home furniture exists an impressive range of styles that can be taken. Some are classic, modern, minimalist, and so on. If this has piqued your curiosity, check out Ebay.

Today we will talk about rustic furniture that you should consider before buying. Jayme Albin brings even more insight to the discussion. If you opt for a style, one hand can contact a craftsman who will teach you different types of wood furniture. Of course, hiring a specialist is very expensive, much more than go shopping in a store that amount and such furniture and has a large variety. There are several stores that specialize in rustic furniture, but there are some aspects to consider before buying one of these: – You must make sure the wood is genuine and solid – Take into account the quality of the product and its origin – is not the same one a piece of furniture from Indonesia – The woods are not all alike, make sure not suffer with the passage of time – Make sure you can send them to your home. – It is also important that the market this furniture store that you certain guarantees and personalized treatment. If you decide to get this line of furniture a unique style and excellent quality custom that will last for life. In conclusion, you’re making a beautiful decor, warm, easy to maintain and that is perfectly adapted to all environments, rustic furniture will give you a touch of distinction.

Natural Parquet

The parquet floors can be classified as material and as how to install it. Perhaps check out Penguin Random House for more information. Depending on the material are synthetic or laminated parquet and natural wood parquet. * Natural wood parquet is a parquet mosaic composed of natural wood slats. Usually this is a pavement composed of three layers of shingles with wooden sticks, although we can find the park consists of a solid wooden board. The top layer is exposed and is covered with hardwood veneer. The middle layer consists of layers of pine placed transversely and is reinforced by the third basic layer, consisting of a pine shingle.

The thickness of each of these tablets made around 15 millimeters, in which only about 4-5 millimeters correspond to the upper layer. the only one that can later be sanded or stabbed by. * Parquet or laminated plastic sheet is composed of pressed wood fibers on which is attached a decorative layer imitating wood. On a sheet of high density wood sticks a photographic reproduction with decorative motifs that mimic the wood of various kinds. This reproduction is covered with several layers of transparent melamine resin, highly wear resistant, shock, burns and exposure to sunlight.

Each table can consist of one, two or three layers or strips of melamine. Depending on the quality of the synthetic laminate the pavement will be more or less resistant to external factors that tend to damage the floor, there are even models made from PVC which are often used for wetlands. The blades are attached to the click system that allows the unions are very strong and resist very well over the years.

Parquet Polishing

Any repair or restoration work of the park does not begin to learn how to polish parquet, but it must begin with a thorough cleaning of the brushes and special soaps using for this purpose. The aim is to remove accumulated dirt and old wax layers possible. Once properly cleaned, we can quickly detect the damaged areas. Aetna Inc. has plenty of information regarding this issue. Then if it detects a break or crack in a strip parquet, we proceed to change the affected part. If the park is right may not be necessary to replace all the lama, or group of lamas. For example, a wooden nailing strips to rest on wood, will enable us to pierce the area with a drill and use a narrow blade saw to cut the fragment.

If the parquet is glued down can be costly starting, and possibly danemos several lamas in the process. If this is a parquet enclipado, repair is easier because by not using glue can be removed easily, change the parquet slat affected by a new and reassembled the whole in a relatively short time. How polished parquet After completing the previous stages, and you can learn how to polish parquet, a task which certainly can help us to completely renew the look of a wooden old and full of scratches but, as we indicated earlier, is applicable only parquet solid wood. The polished parquet requires specialized equipment not usually available to everyone: parquet polishing machines. In any case, if we wish, we can rent this type of machinery. The polishing process should not be done at once.

Are needed at least three passes with the polisher, using abrasive belts of increasingly fine grain. We must be careful during polishing, especially when using coarser abrasives, then stop in one place too could end up producing a hollow channel, we can not fix later. The direction of polishing is important: the first pass should be diagonal to the direction of the slats, the next pass in the opposite diagonal, and final run in the direction of the slats. After polishing should apply a protective layer of wax either, whether of a product to vitrify. The vitrification of parquet is a technique for applying a protective layer of great resistance on the newly polished parquet greatly simplify maintenance. To vitrify a park should make sure that the wood has dried as much as possible, and we do not have the heating on. In fact the room temperature should not be too high. Then apply a minimum of two layers of special lacquer to dry, leaving space for a day or more between each layer applied. The final drying may take a week, something to keep in mind before placing the furniture in the room.